Alphacool Eiswolf 2 AIO - 360mm RX 7900XTX Reference with Backplate - Special Order in

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Essentially, you'll get the performance benefits of a custom water loop thanks to a larger waterblock and radiator with the convenience of an all-in-one design!

Fullcover Waterblock?
The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a custom graphics card water cooler.

Chrome-plated copper
The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.

Pump
The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.

Fittings and Tubing
As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.

Expandability
By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.

Lighting and fans
The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.

NexXxoS Radiator
As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.

The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.

Technical note!
Due to long storage and transit times, the coolant in the Eiswolf 2 AIO may settle. This may lead to a brownish discoloration. As soon as the pump starts operating, the ingredients will mix again and the liquid should become clear again. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact Alphacool's support team via E-Mail (info@alphacool.com) for immediate support.

• Compatibility:
  - AMD Radeon RX 7900 XTX, 24GB GDDR6
  - ASRock Radeon RX 7900 XTX, 24GB GDDR6
  - Asus Radeon RX 7900 XTX, RX7900XTX-24G, 24GB GDDR6 (90YV0IT0-U0NM00)
  - Biostar Radeon RX 7900 XTX, 24GB GDDR6 (VA7906AEF4)
  - Gigabyte Radeon RX 7900 XTX 24G, 24GB GDDR6 (GV-R79XTX-24GC-B)
  - PowerColor Radeon RX 7900 XTX, 24GB GDDR6 (RX 7900 XTX 24G)
  - XFX Radeon RX 7900 XTX, 24GB GDDR6 (RX-79XMBABF9)
  

  
  

  Technical data radiator
  Dimensions (L x W x H)	395 x 124 x 30mm (+/- 3%)
  Material cooling fins, chambers & channels	Copper
  Material threads	Brass
  Material outer housing	stainless steel
  G 1/4“ threads	2 x for tubes (+ 1x Fillport G1/4“)
  For fan size	120 mm
  Options for fan assembly	3 x one-sided / 6 x both-sided

  
  

  Technical data cooler and pump
  Dimensions (L x W x H)	268,58 x 144,80 x 47,70 mm
  Material cooler bottom	Chrome plated copper
  Material cooler top	acrylic
  Threads	2 x G1/4“
  Pump type	DC-LT 2
  Pump speed	2600 rpm (+/- 10%)
  Head of delivery	1 m
  Maximum flow rate	72 L/h
  Voltage	6-13.5V DC
  Power consumption	3.2W
  MTBF	50.000 h

  
  

  Technical data liquid
  Color	clear
  Ingredient 1	Destilled water (CAS-number 7732-18-5)
  Ingredient 2	Glysantin (CAS-number 1017-21-1)
  Working temperatures	-15 C° / +90 °C

  
  

  Technical data quick fasteners
  Dimensions (L x D)	95 x 27mm
  Material	Nylon
  For tube size	12,7 / 7,6mm
  Color	Black

  
  

  Technical data fittings
  L x D straight fitting	24 x 18mm
  Quantity straight fittings	2x
  L x B x H 90° fitting	35 x 27 x 17mm
  Quantity 90° fittings	2x
  For tube size	12,7 / 7,6mm
  Material fittings	Brass

  
  

  Technical data tube
  Length	50cm
  Material tube	TPV (EPDM/PP)
  Color	Matt black
  Tube size	12,7 / 7,6mm
  Hardness grade	35 Shore-A to 50 Shore-D
  Working temperature	-50 to +155 °C

  
  

  Technical data fan
  Speed	0 - 2500 RPM
  Static pressure	3,17 mm H2O
  Air flow rate	119,8 m³/h
  Bearings	Sleeve bearing
  Fan connector	4-Pin PWM
  Connection Digital aRGB	3-Pin JST + 3-Pin 5V
  Dimensions (L x W x H)	120 x 120 x 25mm
  Net weight	187g
  Max working temperature	60°C

  
  

  
  

  Note on application
  Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

  Further links

  •  Datenblatt (DE)
  •  Datasheet (EN)
  •  Manual(1)
  •  Manual(2)
  •  Sicherheitsdatenblatt
  •  Safety data sheet
  •  GPU Configurator
  •  Compatibility List